As a molded production of rubber products, the requirements for its molds are as follows:
1 can ensure that the product has the correct contour and size.
2 requires a certain degree of smoothness, cavity surface, rough Chengdu should meet the quality requirements of the surface of the product. Reasonable parting surface to ensure that the quality of the product is easy for the colleague to trim the rubber edge.
3 The overall structure of the mold should be reasonable, the positioning is reliable, and the operation of loading, clamping, and taking products is simple.
4 Improve the life of the mold as much as possible.
5 Under the condition of ensuring sufficient strength, the weight of the mold should be reduced as much as possible.
6 Under the premise of ensuring product quality, the mold should be as easy to process as possible.
7 There is a suitable flow tank for easy venting and draining excess glue.
8 The working area of the mold requires reasonable design and is suitable for the selected vulcanizing press. The height of the mold is proportional to the size of the shape of the body to meet the needs of the forming of the part.
What are the requirements for a qualified vulcanization mold?
2019年3月2日
Rubber Molds FAQs
Comments Off on What are the requirements for a qualified vulcanization mold?
Editor
As a molded production of rubber products, the requirements for its molds are as follows:
1 can ensure that the product has the correct contour and size.
2 requires a certain degree of smoothness, cavity surface, rough Chengdu should meet the quality requirements of the surface of the product. Reasonable parting surface to ensure that the quality of the product is easy for the colleague to trim the rubber edge.
3 The overall structure of the mold should be reasonable, the positioning is reliable, and the operation of loading, clamping, and taking products is simple.
4 Improve the life of the mold as much as possible.
5 Under the condition of ensuring sufficient strength, the weight of the mold should be reduced as much as possible.
6 Under the premise of ensuring product quality, the mold should be as easy to process as possible.
7 There is a suitable flow tank for easy venting and draining excess glue.
8 The working area of the mold requires reasonable design and is suitable for the selected vulcanizing press. The height of the mold is proportional to the size of the shape of the body to meet the needs of the forming of the part.